🛠️ FreeToolsHub
🏡

Fencing Cost Calculator

Estimate fence installation costs for wood, vinyl, chain link, aluminum, and wrought iron. Compare materials and get instant pricing.

💡

Quick Reference (6ft fence, installed)

Chain Link: $15-25/ft • Wood: $20-45/ft • Vinyl: $28-45/ft • Aluminum: $30-50/ft

📏 Fence Length

linear feet

📐 Fence Height

6ft is most common for privacy • 4ft for decorative

🪵 Fence Material

🚪 Gates

1
0

🔧 Include Professional Installation

Labor typically adds 30-40% to material cost

Total Estimated Cost

$3,150 - $6,100

Wood (Pressure-Treated) • 6ft height • 150 ft

📋 Cost Breakdown

Fence (150 ft)$3,000 - $5,700
Gates (1 walk)$150 - $400
Cost Per Linear Foot$20 - $38

🪵 Wood (Pressure-Treated)

Lifespan

10-15 years

Maintenance

Medium

✓ Affordable wood option✓ Privacy✓ Paintable

📊 Compare All Materials (6ft)

⛓️ Chain Link (Galvanized)$15-$25/ft
⛓️ Chain Link (Vinyl-Coated)$20-$35/ft
🪵 Wood (Pressure-Treated)$20-$38/ft
🪵 Wood (Cedar)$25-$45/ft
🏠 Vinyl (PVC)$28-$45/ft
🔩 Aluminum$30-$50/ft
🏛️ Wrought Iron$40-$75/ft

📊 Fence Cost Comparison (200 ft, 6ft height, installed)

Average costs for a typical backyard fence project

MaterialCost/FootTotal (200ft)LifespanMaintenance
⛓️ Chain Link (Galvanized)$15 - $25$3,000 - $5,00015-20 yearsLow
⛓️ Chain Link (Vinyl-Coated)$20 - $35$4,000 - $7,00020-25 yearsLow
🪵 Wood (Pressure-Treated)$20 - $38$4,000 - $7,60010-15 yearsMedium
🪵 Wood (Cedar)$25 - $45$5,000 - $9,00015-20 yearsMedium
🏠 Vinyl (PVC)$28 - $45$5,600 - $9,00020-30 yearsVery Low
🔩 Aluminum$30 - $50$6,000 - $10,00020-30 yearsLow
🏛️ Wrought Iron$40 - $75$8,000 - $15,00050+ yearsMedium

💰 Factors That Affect Fence Cost

1

Material Type

Chain link is cheapest ($10-25/ft), wood mid-range ($20-45/ft), vinyl and aluminum higher ($25-55/ft), wrought iron most expensive ($40-100/ft).

2

Fence Height

Taller fences cost more. A 6ft fence costs 20-30% more than a 4ft fence. An 8ft fence can cost 50%+ more than standard height.

3

Terrain & Access

Slopes, rocks, tree roots, and difficult access can increase labor costs by 25-50%. Permits may be required ($50-$500).

4

Gates & Extras

Walk gates add $150-400 each. Drive gates cost $500-1,500. Post caps, staining, and decorative elements add to cost.

🌳 Fence by Acre Reference

Perimeter calculations assume a square lot shape

Lot SizePerimeterChain LinkWoodVinyl
1 acre835 ft$16,700$26,720$31,730
2 acre1181 ft$23,620$37,792$44,878
5 acre1868 ft$37,360$59,776$70,984
0.25 acre417 ft$8,340$13,344$15,846

* Based on 6ft height, average installed pricing. Actual costs vary by location and contractor.

💡 Money-Saving Tips

  • Get 3+ quotes from contractors
  • Consider DIY for chain link (save 40-50%)
  • Schedule in off-season (fall/winter)
  • Share costs with neighbors
  • Remove old fence yourself ($3-5/ft saved)

⚠️ Before You Start

  • Check local permit requirements
  • Verify property lines (survey)
  • Call 811 before digging
  • Review HOA restrictions

Frequently Asked Questions

For 200 feet of 6-foot high fencing, costs range from: Chain link ($3,000-$5,000), Wood pressure-treated ($4,000-$7,600), Cedar ($5,000-$9,000), Vinyl ($5,600-$9,000), Aluminum ($6,000-$10,000), and Wrought iron ($8,000-$15,000). These prices include professional installation. Material-only costs are typically 40-60% less.

A 500-foot fence at 6-foot height typically costs: Chain link galvanized ($7,500-$12,500), Wood privacy ($10,000-$19,000), Vinyl ($14,000-$22,500), or Aluminum ($15,000-$25,000). Add $150-$400 per walk gate and $500-$1,200 per drive gate. Labor is usually 30-40% of total cost.

100 linear feet of 6-foot fencing costs approximately: Chain link ($1,500-$2,500), Wood pressure-treated ($2,000-$3,800), Cedar ($2,500-$4,500), Vinyl ($2,800-$4,500), Aluminum ($3,000-$5,000). These are installed prices; DIY material costs are roughly half.

Installation labor for 100 feet of fence runs $500-$1,500 depending on fence type, height, and terrain. Chain link installation is cheapest at $5-$10/ft. Wood and vinyl run $8-$15/ft for labor. Difficult terrain, slopes, or rock can increase labor costs by 25-50%.

Chain link fencing is the cheapest option at $10-$25 per linear foot installed for a 6-foot fence. Pressure-treated wood is the cheapest privacy fence at $20-$38 per foot. For DIY, chain link materials cost $5-$15 per foot. Wire fencing is even cheaper but only suitable for rural/farm use.

Wood fencing costs $20-$45 per linear foot installed (6ft height), while vinyl costs $28-$45 per foot. However, vinyl requires no painting, staining, or sealing, saving $1-$3 per foot annually in maintenance. Over 20 years, vinyl often costs less total despite higher upfront price.

To fence by acre, first calculate perimeter. A square acre has approximately 835 linear feet of perimeter. For a quarter acre, it's about 417 feet. Multiply the perimeter by your chosen fence's cost per foot. Example: 1 acre with $25/ft vinyl fence = 835 × $25 = $20,875.

🏡 Disclaimer: Cost estimates are based on national averages and may vary significantly by location, contractor, terrain, and material quality. Always obtain multiple quotes from licensed contractors for accurate pricing. Prices reflect 2025 market rates.